{"id":1571,"date":"2021-06-22T15:12:58","date_gmt":"2021-06-22T13:12:58","guid":{"rendered":"https:\/\/www.three-tec.ch\/?page_id=1571"},"modified":"2026-02-25T11:33:55","modified_gmt":"2026-02-25T10:33:55","slug":"process-equipment","status":"publish","type":"page","link":"https:\/\/www.three-tec.ch\/en\/prozessequipment\/","title":{"rendered":"Process equipment"},"content":{"rendered":"<h1>Process equipment<\/h1>\t\t\t\t\t\n\t\t\t<p>Our extensive range of peripheral devices covers all needs<br \/><\/p>\t\t\n\t<ul>\n\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#granulator\" target=\"_self\"  data-hover=\"Granulator HMI\" aria-label=\"Granulator HMI\">Granulator HMI<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#granulatoreco\" target=\"_self\"  data-hover=\"Granulator ECO\" aria-label=\"ECO granulator\">ECO granulator<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#heissabschlag\" target=\"_self\"  data-hover=\"Heissabschlag\" aria-label=\"Hot cutter\">Hot cutter<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#spheronizer\" target=\"_self\"  data-hover=\"Spheronizer\" aria-label=\"Spheronizer\">Spheronizer<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#f\u00f6rderbandmini\" target=\"_self\"  data-hover=\"F\u00f6rderband Labor\" aria-label=\"Conveyor belt laboratory\">Conveyor belt laboratory<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#k\u00fchlf\u00f6rderband\" target=\"_self\"  data-hover=\"K\u00fchlf\u00f6rderband\" aria-label=\"Cooling conveyor belt\">Cooling conveyor belt<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#wasserbad\" target=\"_self\"  data-hover=\"K\u00fchlbad\" aria-label=\"Cooling bath\">Cooling bath<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#folienwalze\" target=\"_self\"  data-hover=\"Folienwalze\" aria-label=\"Film roller\">Film roller<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#aufwickler\" target=\"_self\"  data-hover=\"Aufwickler\" aria-label=\"Rewinder\">Rewinder<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#kalander\" target=\"_self\"  data-hover=\"Kalander\" aria-label=\"Calender\">Calender<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#k\u00fchlwalze\" target=\"_self\"  data-hover=\"K\u00fchlwalze\" aria-label=\"Chill Roll\">Chill Roll<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#stopfdosierer\" target=\"_self\"  data-hover=\"Stopfdosierger\u00e4t\" aria-label=\"Stuffing feeding device\">Stuffing feeding device<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t\t<li>\n\t\t\t<h6>\n\t\t\t<a href=\"#seitendosierer\" target=\"_self\"  data-hover=\"Seitendosierger\u00e4t\" aria-label=\"Side feeding device\">Side feeding device<\/a>\n\t\t\t<\/h6>\n\t\t<\/li>\n\t\t\t\t<\/ul>\n\t<h2>\n\t\t\t\tHigh quality process equipment\n\t\t\t<\/h2>\n\t<p>In our process equipment range, you will find a large selection of peripheral devices to cover all your needs. All products are manufactured at our site. This allows us to guarantee the highest quality and to respond to customer requests individually and promptly.<\/p>\n\t\t\t<a href=\"https:\/\/www.three-tec.ch\/en\/product-search\/?_kategorie=prozessequipment\" title=\"To the assortment overview\" target=\"_self\"   role=\"button\" aria-label=\"To the assortment overview\">\n\t\t\t\t\t\t\tTo the assortment overview\n\t\t<\/a>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tGranulator HMI\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tECO granulator\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tHot cutter\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tSpheronizer\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tConveyor belt laboratory\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tCooling conveyor belt\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tCooling bath\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tFilm roller\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tRewinder\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tCalender\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tChill Roll\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tStuffing feeding device\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tSide feeding device\n\t\t\t<\/li>\n\t\t<\/ul>\n\t<h2>\n\t\t\t\tGranulator HMI\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2020\/03\/GranulatorS59.jpg\" alt=\"GranulatorS59\" title=\"GranulatorS59\" itemprop=\"image\"\/>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2025\/11\/GranulatorS59_Detail.jpg\" alt=\"GranulatorS59_Detail\" title=\"GranulatorS59_Detail\" itemprop=\"image\"\/>\n\t<p>The HMI granulator can be used to process strands into pellets. The speed of the feed roller and the cutting blade can be adjusted independently of each other. This means that the extrudate feed can be perfectly matched to the extrudate and the pellet length can be adjusted during processing between <strong>0.5 to 15 mm<\/strong> can be adjusted. The adjustable clamping pressure also enables gentle and precise processing of delicate granulate.<\/p>\n<p>The granulator HMI has an integrated control system including a touch panel for user-friendly operation or can be integrated into a higher-level system via an interface. Depending on the application, rotary knives with different numbers of blades or different materials are used. The design of the cutting edge enables problem-free pelletizing of both soft and hard extrudates. Depending on the process requirements, the device can be equipped with a container for laboratory or batch pelletizing or with a hopper for continuous pelletizing.<\/p>\n<p>The compact design allows the instrument to be placed in an isolator or in a laboratory environment with limited space.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tCompact design\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tUser friendly operation\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tCustomized rotary knives producible\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tGranule length 0.5 to 15 mm\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tSuitable for soft and hard extrudates\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tControl via touch panel or external control\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tECO granulator\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2026\/02\/Granulator-ECO.jpg\" alt=\"Granulator-ECO\" title=\"Granulator-ECO\" itemprop=\"image\"\/>\n\t<p>The ECO granulator can be used to process strands into pellets. The cutting length is determined by the rotary blade.<\/p>\nDepending on the application, rotary knives with different numbers of blades or different materials are used. The design of the cutting edge enables problem-free granulation<br \/>\nof both soft and hard extrudates.\n<p>The compact design allows the device to be placed in an isolator or in a laboratory environment with limited space. It is operated via the input unit of the frequency inverter.<\/p>\n<p>The DN 89 granulator contains a strand guide centering device for max. 5 strands of 5 mm each.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tCompact design\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tUser friendly operation\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tCustomized rotary knives producible\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tGranule length 1, 2, 3, 4 or 5 mm\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tSuitable for soft and hard extrudates\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tHot cutter\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/Heissabschlag.jpg\" alt=\"Hot cutter\" title=\"Hot cutter\" itemprop=\"image\"\/>\n\t\t<meta itemprop=\"url\" content=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/TT_Hot-Cutter.mp4\" \/><div style=\"width: 640px;\" class=\"wp-video\"><video class=\"wp-video-shortcode\" id=\"video-1571-1\" width=\"640\" height=\"360\" preload=\"metadata\" controls=\"controls\"><source type=\"video\/mp4\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/TT_Hot-Cutter.mp4?_=1\" \/><source type=\"video\/mp4\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/TT_Hot-Cutter.mp4?_=1\" \/><a href=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/TT_Hot-Cutter.mp4\">https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/TT_Hot-Cutter.mp4<\/a><\/video><\/div>\t\n\t<p>With the hot die, the extrudate can be reliably processed into pellets with one or more knives in direct contact with the die plate. Both wet and melt extrudates can be processed. The number of knives used and the speed setting enable the production of pellet sizes between <strong>0.5 to 10 mm<\/strong>.<\/p>\n<p>The hot cutter is controlled by means of an integrated potentiometer or optionally directly via the control system of the Three-Tec extruder. An optional housing is available for the hot cutter.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tCompact design\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tGranule size 0.5 to 10 mm\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tRetrofittable\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tVery brittle extrudates can be cut, since the extrudate strand is still warm and thus plastic and too short to break\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tSince the cut extrudates are still plastic, they can be directly formed into perfect spherical extrudates\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tSpheronizer\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/Spheronizer_neu.png\" alt=\"Spheronizer_new\" title=\"Spheronizer_new\" itemprop=\"image\"\/>\n\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/06\/Spheronizer2-660x315.jpg\" alt=\" \"\/>\n\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/06\/Spheronizer1-660x315.jpg\" alt=\" \"\/>\n\t<p>The Spheronizer is used for reducing the length and rounding off fine extrudate strands. The desired geometry of the end product is influenced by the batch size, the speed and the surface structure of the friction disc.<\/p>\n<p>The modular concept of Three-Tec's Spheronizers offers the customer the possibility to use friction discs with different surface structures or to combine different container sizes for different batch sizes with the same drive unit.<\/p>\n<p>Equipped with an electric heater and connections for a temperature control unit, the container can be heated or cooled if required.<\/p>\n<p>The Spheronizer is controlled by means of an integrated touch panel or a frequency converter. The speed of the friction disc can be infinitely varied between <strong>200 to 4,000 revolutions per minute<\/strong> Set.<\/p>\n<p>Depending on the size of the container, a<strong> Batch quantity from 5 to 2,000 grams<\/strong> processed (larger batch quantities also possible on request).<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tSuitable for product development as well as smaller production batches\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tDifferent container sizes with the same drive unit\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tFriction discs with different surface structures\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tVery easy disassembly, emptying and cleaning of the container and the friction disk\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tHeatable tank by means of electric heating\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tConnections for liquid temperature control (heating or cooling)\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tBatch quantities of up to 2,000 grams can be processed (larger batch quantities also possible on request)\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tFriction disc speed 200 to 4,000 revolutions per minute\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tControl via touch panel or frequency converter\n\t\t\t<\/li>\n\t\t<\/ul>\n\t<h2>\n\t\t\t\tConveyor belt laboratory\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2024\/06\/Foerderband.jpg\" alt=\"Conveyor belt\" title=\"Conveyor belt\" itemprop=\"image\"\/>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/09\/Foerderband.png\" alt=\"Conveyor belt\" title=\"Conveyor belt\" itemprop=\"image\"\/>\n\t<p>The conveyor belt is suitable for gentle removal and cooling of the extrudate. In order to achieve more efficient cooling of the extrudate, a cooling tank can optionally be integrated on which the belt rests and is continuously cooled. This enables the haul-off of extrudates with a temperature of up to <strong>300 \u00b0C<\/strong>.<\/p>\n<p>The belt speed can be varied between<strong> 0 and 15 m\/min<\/strong> can be adjusted. The conveyor belt is controlled by means of an integrated potentiometer, or optionally directly via the control of the Three-Tec extruder.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tMaterial conveyor belt: silicone or PTFE\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIntegrated or external control\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tBelt speed: 0 to 15 m\/min\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tMax. product temperature: 300 \u00b0C\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tHeight and belt angle adjustable\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tOptionally with cooling tank (water\/air)\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tCooling conveyor belt\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/Kuehlfoerderband2.png\" alt=\"Cooling fan tape2\" title=\"Cooling fan tape2\" itemprop=\"image\"\/>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/09\/Kuehlfoerderband_Detail.png\" alt=\"Cooling Conveyor_Detail\" title=\"Cooling Conveyor_Detail\" itemprop=\"image\"\/>\n\t<p>The cooling conveyor belt is suitable for the gentle removal and efficient cooling of extrudates and granules. The conveyor belt rests on actively cooled cooling elements and is permanently cooled during operation.<\/p>\n<p class=\"translation-block\">Air connections in the lid of the cooling conveyor belt allow additional air cooling of the product. The belt speed can be variably adjusted between <strong>0 and 20 m\/min<\/strong>. The conveyor belt is controlled by means of an integrated frequency converter or optionally directly via the control system of the Three-Tec extruder.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tMaterial conveyor belt: silicone or PTFE\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIntegrated or external control\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tBelt speed: 0 to 20 m\/min\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tMax. product temperature: 300 \u00b0C\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tHeight and belt angle adjustable\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tActive belt cooling\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tConnections for air cooling\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tCooling bath\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/Wasserbad.png\" alt=\"Water bath\" title=\"Water bath\" itemprop=\"image\"\/>\n\t<p>The cooling bath in different lengths and designs is used for efficient cooling of various extrudates before further processing by means of a winder or pelletizer. It is equipped with holding-down bars or holding-down rollers and scraper brush and mounted on damping elements. The water can be drained via a valve. In our larger cooling baths, a cooling unit can be connected and the water level is adjustable.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tHold-down bar or hold-down rollers\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tScraper brush\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tConnection for cooling water inflow\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tConnection for cooling water drain (overflow valve)\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tDrain valve for cooling water\n\t\t\t<\/li>\n\t\t<\/ul>\n\t<h2>\n\t\t\t\tFilm roller\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/09\/Folienwalze.jpg\" alt=\"Film roller\" title=\"Film roller\" itemprop=\"image\"\/>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2024\/03\/Folienwalze_Detail.jpg\" alt=\"Foil roller_Detail\" title=\"Foil roller_Detail\" itemprop=\"image\"\/>\n\t<p>The film roller from Three-Tec enables the calibration of flat, dry extrudates. Furthermore, round extrudates can also be rolled into a film with a defined thickness. Subsequently, the product is evenly wound onto a spool.<\/p>\n<p>The film roll consists of an adjustable and temperature-controlled pair of rolls, an adjustable pair of tension rolls and a rewinder, or spool. The tensile force of the draw rollers and the rewinder spool is adjustable. This is ensured by a magnetic coupling.<\/p>\n<p>The film roller is controlled by an integrated frequency converter. Optionally, the device can be integrated into a higher-level system via an interface.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tSimple operation\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tAdjustable traction force between film rollers, draw rollers and reel\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIntegrated or external control\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tRewinder\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2024\/03\/Aufwickler.png\" alt=\"Rewinder\" title=\"Rewinder\" itemprop=\"image\"\/>\n\t<p>The rewinder from Three-Tec is suitable for winding the extrudate onto a spool. The tensile force between the take-off roller and the spool is adjustable, which enables very uniform winding. In addition to round strands, the winder can also be used to wind ribbon-shaped extrudates onto a spool.<\/p>\n<p>The rewinder is controlled by means of an integrated potentiometer. Optionally, the device can be integrated into a higher-level system via an interface.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tCompact design\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tSimple operation\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tAdjustable pull force between trigger roller and bobbin\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIncreased throughput of the extruder\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIntegrated or external control\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tFood<\/li><li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tContact\n\t\t\t<\/h2>\n\t\t\t<p>Are you interested in our process equipment, do you have any questions or would you like personal advice?<\/p>\t\n\t\t\t<a href=\"https:\/\/www.three-tec.ch\/en\/contact\/\" title=\"Contact us\" target=\"_self\"   role=\"button\" aria-label=\"Contact us\">\n\t\t\t\t\t\t\tContact us\n\t\t<\/a>\n\t<h2>\n\t\t\t\tCalender\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/06\/Kalander.png\" alt=\"Calender\" title=\"Calender\" itemprop=\"image\"\/>\n\t\t<figure itemscope itemtype=\"https:\/\/schema.org\/ImageObject\">\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/09\/Kalanderwalzen.jpg\" alt=\"Calender rolls\" height=\"208\" width=\"300\" title=\"Calender rolls\" onerror=\"this.style.display='none'\" loading=\"lazy\" \/>\n\t<\/figure>\n\t<p class=\"translation-block\">The calender from Three-Tec is a versatile laboratory device for the continuous production of films, tapes or tablets directly from the still hot extrudate. Since only a short preparation time is required and the process can be started with the input of a few parameters, it is possible, for example, to produce <strong>10,000 tablets within one day<\/strong>.<\/p>\n<p>The two counter-rotating calender rolls have high forming accuracy, surface quality and hardness, so that end products with the highest demands on product quality can be produced.<\/p>\n<p>The compact design allows the instrument to be placed in an isolator or in a laboratory environment with limited space.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tCompact design\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tShort preparation time\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tUser friendly operation\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tCustomized cavities can be produced\n\t\t\t<\/li>\n\t\t<\/ul>\n<h5>\n\t\t\tApplication areas\t<\/h5>\n\t<ul>\n\t\t<li>\t\t\t\t\n\t\tPharma<\/li><li>\t\t\t\t\n\t\tLaboratory<\/li><li>\t\t\t\t\n\t\tResearch &amp; Development<\/li>\t<\/ul>\n\t<h2>\n\t\t\t\tChill Roll\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2024\/03\/P2_2.jpg\" alt=\"P2_2\" title=\"P2_2\" itemprop=\"image\"\/>\n\t<p>The chill roll is suitable for the efficient and continuous cooling of extrudates from approx. <strong>3 kg\/h to approx. 100 kg\/h<\/strong>. The chill roll picks up the product from the extruder die, distributes it over almost the entire belt width and cools the material reliably and quickly in direct metal contact. Thanks to our unique concept with the extra large wrap angle of the belt on the chill roll, even extrudates with a very high heat capacity or particularly high throughputs can be cooled many times more efficiently and with a comparably small device. After cooling, the cooled and brittle product is broken into flakes by a conveyor and breaker screw and discharged through the outlet pipe (continuous process). The chill roll can either be controlled directly via the Three-Tec extruder's control system or can also be operated as a stand-alone device according to customer requirements.<\/p>\n\t<h2>\n\t\t\t\tStuffing feeding device\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2021\/08\/Stopfdosiergeraet.jpg\" alt=\"Stuffing feeding device\" title=\"Stuffing feeding device\" itemprop=\"image\"\/>\n\t<p>Stuffing feeders are used for the reliable feeding of very difficult to feed or very cohesive and very light products into an extruder. Products are pressed into the barrel of the extruder from above using the tamping feeder.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tFeeding of products that are very difficult to feed\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tImproved product quality\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIncreased throughput of the extruder\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tHigh feeding consistency\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tQuick release clamps for easy and fast disassembly and cleaning\n\t\t\t<\/li>\n\t\t<\/ul>\n\t<h2>\n\t\t\t\tSide feeding device\n\t\t\t<\/h2>\n\t\t\t\t<img decoding=\"async\" src=\"https:\/\/www.three-tec.ch\/wp-content\/uploads\/2024\/01\/Seitendosiergeraet.jpg\" alt=\"Side feeding device\" title=\"Side feeding device\" itemprop=\"image\"\/>\n\t<p>Side feeders are used for the forced feeding of powders and granulates into an extruder. Three-Tec manufactures side feeders for all extruder sizes and throughput ranges.<\/p>\n\t<ul>\n\t\t\t<li>\n\t\t\t\tFeeding of powders, granules and fibers\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tGentle processing of additives\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tImproved product quality\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tIncreased throughput of the extruder\n\t\t\t<\/li>\n\t\t\t<li>\n\t\t\t\tQuick release clamps for easy and fast disassembly and cleaning\n\t\t\t<\/li>\n\t\t<\/ul>","protected":false},"excerpt":{"rendered":"<p>Prozessequipment Unser umfangreiches Sortiment an Peripherieger\u00e4ten deckt alle Bed\u00fcrfnisse ab Granulator HMI Granulator ECO Heissabschlag Spheronizer F\u00f6rderband Labor K\u00fchlf\u00f6rderband K\u00fchlbad Folienwalze Aufwickler Kalander K\u00fchlwalze Stopfdosierger\u00e4t Seitendosierger\u00e4t Hochwertiges Prozessequipment In unserem Prozessequipment-Sortiment finden Sie eine grosse Auswahl an Peripherieger\u00e4ten, die alle Ihre Bed\u00fcrfnisse abdecken. S\u00e4mtliche Produkte werden an unserem Standort gefertigt. Damit k\u00f6nnen wir h\u00f6chste Qualit\u00e4t [&hellip;]<\/p>\n","protected":false},"author":4,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"_seopress_robots_primary_cat":"","_seopress_titles_title":"Prozessequipment | Three Tec","_seopress_titles_desc":"In unserem Prozessequipment-Sortiment finden Sie eine grosse Auswahl an Peripherieger\u00e4ten. S\u00e4mtliche Produkte werden an unserem Standort gefertigt.","_seopress_robots_index":"","site-sidebar-layout":"no-sidebar","site-content-layout":"page-builder","ast-site-content-layout":"full-width-container","site-content-style":"unboxed","site-sidebar-style":"unboxed","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"disabled","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"default","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"iawp_total_views":916,"footnotes":""},"class_list":["post-1571","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/pages\/1571","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/comments?post=1571"}],"version-history":[{"count":11,"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/pages\/1571\/revisions"}],"predecessor-version":[{"id":10499,"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/pages\/1571\/revisions\/10499"}],"wp:attachment":[{"href":"https:\/\/www.three-tec.ch\/en\/wp-json\/wp\/v2\/media?parent=1571"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}