Our product range includes a wide selection of process equipment that can be used to implement complete production lines.
In addition to our main equipment, extruders and feeding devices, we also offer a wide range of additional equipment. When planning a complete production line, we take care of the development, manufacture, integration, and coordination of all components. This means you have a single point of contact with clear responsibilities and a system that is designed as a single unit from the outset. If necessary, we also integrate third-party equipment to ensure seamless integration. From the initial idea to commissioning, we remain the sole point of contact for our customers.
All our devices are manufactured at our site in Seon. This allows us to maintain control over every step of the process: from the raw materials to processing and the finished device. This guarantees short distances, fast response times, and the highest quality.
The process equipment in our portfolio:
Granulator HMI
The Granulator HMI can be used to process strands into granulate. The granulate size can be adjusted between 0.5 and 15 mm during the processing process.
Hot cutter
With the hot cut-off, the extrudate can be processed into pellets of sizes between 0.5 and 10 mm with one or more knives in direct contact with the die plate.
Spheronizer
The Spheronizer is used to reduce the length and round off fine extrudate strands. Depending on the container size, a batch quantity of 5 to 2,000 g can be processed.
Conveyor belt laboratory
The conveyor belt is suitable for gentle removal and cooling of the extrudate at temperatures of up to 300 °C.
Cooling conveyor belt
The cooling conveyor belt allows extrudates and granulates to be cooled efficiently and transported away gently.
Cooling bath
The cooling bath, available in various lengths and designs, is used for the efficient cooling of various extrudates prior to further processing with a winder or granulator.
Film roller
The film roller enables flat extrudates to be calibrated. In addition, round extrudates can be rolled out into a film and wound evenly onto a spool.
Rewinder
The winder is suitable for winding the extrudate onto a spool. The tensile force between the pull-off roller and the spool is adjustable, which enables very even winding.
Calender
The calender is a versatile laboratory device which, in combination with a hot melt extruder, can be used to continuously produce tablets directly from the still-hot extrudate.
Chill Roll
The cooling roller is suitable for the efficient and continuous cooling and comminution of extrudates from approx. 3 kg/h to approx. 100 kg/h.
Stuffing feeding device
The stuffing feeding device is used for the reliable feeding of products that are very difficult to dose or very cohesive and very light into an extruder.
Side feeding device
Powders, granulates, or fibers are fed into an extruder by means of a side feeder.