Products

The ZE 50 is designed for industrial production environments with high throughput and efficiency requirements.

The ZD 32 FB volumetric flat-bottom twin-screw feeder with bottom scraper is particularly suitable for the feeding of poorly flowing and free-flowing powder, which tends to clump or to cake on the hopper wall, or which has a strong tendency to form bridges.

The ZD xx FB gravimetric twin-shaft feeders allow installation in a dust- and water-protected housing.

The ED 65 T - QC volumetric and gravimetric single-screw quick-change dosing units are very easy to dismantle and clean and are particularly suitable for dosing free-flowing products with a particle size of up to 5 mm.

The low-cost ED XX Q-line single-screw feeders without bridge destructors are suitable for feeding easy-flowing granules up to 15 mm particle size.

The ZD 12 B volumetric twin-screw feeder is particularly suitable for the feeding of good to poor flowing products such as powder or microgranules.

The ZE 24 is the logical progression from pilot to production system.

Three-Tec's rewinder is suitable for winding the extrudate onto a spool.

The ZD 22 B volumetric twin-screw feeder is particularly suitable for the feeding of shooting and free-flowing powders, granulates and other bulk materials.

The ZE 32 is designed for medium production volumes and offers an ideal combination of performance, process stability and flexibility.

The ZD 12 FB volumetric flat-bottom twin-screw feeder with bottom scraper is particularly suitable for the feeding of poorly flowing and free-flowing powder, which tends to clump or cake on the hopper wall, or which has a strong tendency to form bridges.

The hot die cuts the exiting extrudate directly at the die plate with one or more knives in contact with the die plate. This device is particularly suitable for brittle or foamed extrudates.

Probably the smallest flat-bottom twin-screw feeder in the world, it is particularly suitable for feeding poorly flowing and free-flowing powder that tends to clump or cake on the hopper wall, or is highly bridging.

The cooling conveyor was developed for the gentle removal and cooling of hot products such as granulates or drops and is available in lengths of 1.5 - 5.0 meters.

With the ZD x FB table-top solution, high-precision batches can be filled gravimetrically.

A cooling bath can be used to cool the extrudate before cutting or other processes. Cooling baths are available in lengths from 0.5 - 5 meters.

The ED 12 volumetric single screw feeder is particularly suitable for fine dosing of small, free-flowing products with a particle size of up to 1 mm.

The ZE 18 is a real all-rounder and covers a wide range of applications, from development projects to smaller production tasks.

The ZD 80 FB twin screw feeder with bottom scraper is suitable for processing various good and poor flowing bulk materials such as fine powders, powders and microgranules with a particle size of 0.02 to 1 mm.

The ZD 5 FB i6000 feeding system with built-in WL260 SP-S AE load cells and WP 231 weighing electronics from Siemens is suitable for high-precision feeding tasks.

The ZE 100 stands for maximum productivity in the continuous processing of large quantities of material.

Three-Tec's calender is a versatile laboratory device for the continuous production of films, tapes or tablets directly from the still hot extrudate.

The cooling roller is suitable for the efficient and continuous cooling of extrudates from approx. 3kg/h to approx. 100kg/h.

The Spheronizer is equipped with an electrically heated funnel jacket or an external temperature control unit and is available for batch quantities from 5 grams to 2 kilograms.

The ZD 9 FB volumetric flat-bottom twin-screw feeder is particularly suitable for dosing poorly flowing and free-flowing powder, which tends to clump or to cake on the hopper wall, or which has a strong tendency to form bridges.

Stuffing feeders are used for the reliable feeding of very poorly metered or very cohesive and very light products into an extruder.

The ZD 22 FB volumetric twin-screw feeder with flat bottom with bottom scraper and intervention protection is particularly suitable for the feeding of poorly flowing and free-flowing powder.

The ZE 12 transfers laboratory results into stable continuous processes and is ideal for pilot batches, clinical production or specialized food applications.

The ED 55 and ED 55 B volumetric single-screw feeders are suitable for feeding free-flowing granules up to 10 mm particle size.

The film roller from Three-Tec enables the calibration of flat, dry extrudates. Furthermore, round extrudates can also be rolled out to a film with defined thickness.

Side feeders are used for the forced feeding of powders and granulates into an extruder.

The ZE 5 is the smallest twin-screw extruder in the world and was developed specifically for applications where material is very valuable or only available in very small quantities.

The ZE 18 marks the transition from laboratory to production and is available both as a compact table top solution and as a production system.

The volumetric and gravimetric single or twin screw Quick Change dosing units are very easy to dismantle and clean.

The Hybrid laboratory extruder combines two screw diameters in one device and thus enables a direct transition between different process sizes without changing machines.

The ZD 32 B volumetric twin-screw feeder is particularly suitable for feeding poorly flowing and free-flowing powder and micro-granules.

The pelletizer is used to pelletize the extrudate strand directly after the water bath or the conveyor belt.

The pelletizer is used to pelletize the extrudate strand directly after the water bath or the conveyor belt.

The volumetric single-screw feeders ED 20 and ED 20 B with and without discharge aid/bridge breaker are suitable for feeding free-flowing products up to 3 mm particle size.

The conveyor belt was designed for gentle removal of the extrudate and is available in lengths of 300 - 500 mm.

The ED 40 volumetric single-screw feeder is particularly suitable for the feeding of free-flowing products with good flow properties up to 10 mm particle size.

A complete production line with flexible placement of devices in high containment OEB 4 / OEB 5 according to ISO 14644-7.

The ZE 9 extends the laboratory scale towards realistic process conditions.

The ED 65 volumetric single-screw feeder is particularly suitable for the feeding of free-flowing products with good flow properties up to 10 mm particle size.